- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Red Circle of Death - XBox 360
Posted on 11/11/10 at 5:34 pm to chadg
Posted on 11/11/10 at 5:34 pm to chadg
Eh as far as it happening again. It's probably one of two things. Either you didn't get the screws tightened down tight enough (probably not it) or you didn't get enough of the old thermal paste off. Make sure when you clean the paste of the processors you get every bit of it off you can. I used a Q-tip and alcohol to get most of it off then used a sharp piece of plastic to scratch off all the paste stuck on there I couldn't get off with alcohol.
You still have cracks in the paste between the processors and the heat sinks. Put down new thermal paste and get all the old off and you should be fine.
You still have cracks in the paste between the processors and the heat sinks. Put down new thermal paste and get all the old off and you should be fine.
2
Posted on 11/11/10 at 6:50 pm to bubbaprohn
maybe i'll try again
Posted on 11/23/10 at 9:45 am to bubbaprohn
I think i did a fairly decent job on cleaning it off. Is it possible i put too much or too little paste back on? The paste i used was about 3 or 4 years old. Been sitting in my desk... Could that have been the problem? It was sealed in plastic but it did seem pretty thick when i squeezed it out...
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News