- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Lawmakers rush to stop 'catastrophic-level event' at Texas oil fields
Posted on 4/1/24 at 6:44 am to Street Hawk
Posted on 4/1/24 at 6:44 am to Street Hawk
Water production is standard during oil & gas production. But I have 2 questions for you oil baws.
1. Aside from organic material/pollutants/etc deposited during climatic events(ex: peat accumulation in bottomlands after percolation/evaporation post-flood events), isn't virtually everything dissolved in brine, and oil for that matter, derived from the local minerals/soils? Take calcium for instance. Limestone is Calcium carbonate. If you have excess water in that soil horizon/formation(due to an aquifer for instance), some of the limestone would dissolve and the resultant solution would contain calcium ions, no? And the amount would increase with volume of water, temperature/heat, and/or appearance of catalysts(CO2) that could aid in increasing solubility
2. If 1 is true, then mineral extraction is essentially just removing large amounts of sub-surface soil using drilling fluid and other chemicals to aid in dissolving whatever soil(mineral found in it) is the target. I would assume the only reason this doesn't cause major ecological issues(land slides, sinkholes, earthquakes) is due to cementing at each end of the well bore and replacing what was extracted with an equivalent volume of water. But if evaporites, salt formations, were to be drilled into/extracted, wouldn't it cause those 3 ecological issues? Replacing the volume removed would be almost impossible due to salts high solubility in water
Seems to me that if enough salt were removed, it would cause a cataclysmic land slide/migration and the end result would be a surface that looks something like grand canyon
1. Aside from organic material/pollutants/etc deposited during climatic events(ex: peat accumulation in bottomlands after percolation/evaporation post-flood events), isn't virtually everything dissolved in brine, and oil for that matter, derived from the local minerals/soils? Take calcium for instance. Limestone is Calcium carbonate. If you have excess water in that soil horizon/formation(due to an aquifer for instance), some of the limestone would dissolve and the resultant solution would contain calcium ions, no? And the amount would increase with volume of water, temperature/heat, and/or appearance of catalysts(CO2) that could aid in increasing solubility
2. If 1 is true, then mineral extraction is essentially just removing large amounts of sub-surface soil using drilling fluid and other chemicals to aid in dissolving whatever soil(mineral found in it) is the target. I would assume the only reason this doesn't cause major ecological issues(land slides, sinkholes, earthquakes) is due to cementing at each end of the well bore and replacing what was extracted with an equivalent volume of water. But if evaporites, salt formations, were to be drilled into/extracted, wouldn't it cause those 3 ecological issues? Replacing the volume removed would be almost impossible due to salts high solubility in water
Seems to me that if enough salt were removed, it would cause a cataclysmic land slide/migration and the end result would be a surface that looks something like grand canyon
This post was edited on 4/1/24 at 6:48 am
Posted on 4/1/24 at 7:08 am to Lolathon234
quote:
Water production is standard during oil & gas production. But I have 2 questions for you oil baws.
1. Aside from organic material/pollutants/etc deposited during climatic events(ex: peat accumulation in bottomlands after percolation/evaporation post-flood events), isn't virtually everything dissolved in brine, and oil for that matter, derived from the local minerals/soils? Take calcium for instance. Limestone is Calcium carbonate. If you have excess water in that soil horizon/formation(due to an aquifer for instance), some of the limestone would dissolve and the resultant solution would contain calcium ions, no? And the amount would increase with volume of water, temperature/heat, and/or appearance of catalysts(CO2) that could aid in increasing solubility
2. If 1 is true, then mineral extraction is essentially just removing large amounts of sub-surface soil using drilling fluid and other chemicals to aid in dissolving whatever soil(mineral found in it) is the target. I would assume the only reason this doesn't cause major ecological issues(land slides, sinkholes, earthquakes) is due to cementing at each end of the well bore and replacing what was extracted with an equivalent volume of water. But if evaporites, salt formations, were to be drilled into/extracted, wouldn't it cause those 3 ecological issues? Replacing the volume removed would be almost impossible due to salts high solubility in water
Seems to me that if enough salt were removed, it would cause a cataclysmic land slide/migration and the end result would be a surface that looks something like grand canyon
The solution to prevent those types of issues is in the drilling mud design. When drilling, you definitely do not want to wash out a zone. Something like that is more likely to happen in an exploratory well, in which case you monitor your pit volumes and cutting returns very closely to make changes as needed. After one or more wells are drilled and the geology is known, a better mud design can be planned for the entirety of future wells in the same area/formations. There's a lot more to it than just knowing the types of formations you're drilling through though. The people that monitor and make changes to the mud during drilling are often referred to as mud engineers, even though they are not actually engineers.
Posted on 4/1/24 at 7:17 am to Lolathon234
quote:
If 1 is true, then mineral extraction is essentially just removing large amounts of sub-surface soil using drilling fluid and other chemicals to aid in dissolving whatever soil(mineral found in it) is the target
Not how it works at all. During the drilling phase the drilling mud creates a filter cake and interaction with the formation is kept to a minimum which is by design. Once each section is drilled the open hole is cased off with steel casing and cemented to make a barrier. During the production phase you are only extracting liquids with some sand (depending on the production zone).
This post was edited on 4/1/24 at 7:20 am
Popular
Back to top
Follow TigerDroppings for LSU Football News