- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
re: Who to Call .... Dolby Atmos Samsung-Denon
Posted on 3/5/24 at 6:34 am to Obtuse1
Posted on 3/5/24 at 6:34 am to Obtuse1
You have a 5.1.2 set up which is a better format than 7.1.
Using ceiling speakers is just fine for rear surround.
The two behind or closest to the listening position in the ceiling will be the surround , two closest to the TV will be the height/Atmos speakers
You will need HDMI
You will set Auydessy amp selection/speaker configuration to 5.1 + Atmos front height giving you a 5.1.2 atmos enabled system.
Consult manual for proper speaker wiring location on back of AVR
All of your speakers will be set to “small” this is because you have a subwoofer. No sub, set to large.
After running the Auydessy room correction, set all speakers to small and Front/center and surround crossovers to 80hz, Atmos to 120hz
For the subwoofer, you want to set the subwoofer volume (on the sub itself) so that when running a test it automatically sets the sub at -11 or greater. If you see -12 the sub is set too loud and you need to lower and run again. When you see it at -11 or -10 etc, your sub is correct and proceed to start speaker sweep.
When completely done, add +2 - +4 on the subwoofer level in the manual speaker setting menu on the AVR (not physical subwoofer)
This will give you a solid starting point that you can then adjust to your liking.
Let me know if you have any questions
Using ceiling speakers is just fine for rear surround.
The two behind or closest to the listening position in the ceiling will be the surround , two closest to the TV will be the height/Atmos speakers
You will need HDMI
You will set Auydessy amp selection/speaker configuration to 5.1 + Atmos front height giving you a 5.1.2 atmos enabled system.
Consult manual for proper speaker wiring location on back of AVR
All of your speakers will be set to “small” this is because you have a subwoofer. No sub, set to large.
After running the Auydessy room correction, set all speakers to small and Front/center and surround crossovers to 80hz, Atmos to 120hz
For the subwoofer, you want to set the subwoofer volume (on the sub itself) so that when running a test it automatically sets the sub at -11 or greater. If you see -12 the sub is set too loud and you need to lower and run again. When you see it at -11 or -10 etc, your sub is correct and proceed to start speaker sweep.
When completely done, add +2 - +4 on the subwoofer level in the manual speaker setting menu on the AVR (not physical subwoofer)
This will give you a solid starting point that you can then adjust to your liking.
Let me know if you have any questions
This post was edited on 3/5/24 at 6:41 am
Popular
Back to top
Follow TigerDroppings for LSU Football News