- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
FN 509 Help or BR Gunsmith rec
Posted on 4/28/23 at 3:51 pm
Posted on 4/28/23 at 3:51 pm
slide on my FN 509 is stuck closed and cannot get it to slide back. It sounds like its catching on something when I try. The recoil spring/piston under the barrel is recessed in its tube by about 1/4" - not supposed to be like that. I have no idea how it got like that. Anyone have any tips on unsticking it or a BR gunsmith rec? TIA.
Posted on 4/28/23 at 4:24 pm to Duckhammer_77
What were you doing when it happened? Where you reassembling it? Sounds like one of the rails isn't lined up during reassembly.
Posted on 4/28/23 at 7:57 pm to armsdealer
I didn't do anything, didn't disassemble. It was in my hunting bag, maybe it got knocked hard or something.
Posted on 4/29/23 at 4:07 am to Duckhammer_77
Bring it by Jim’s. I know people here hate on them but they have a pretty good gunsmith named Nick. He recently fitted a 1911 Wilson bill barrel for me and did a reverse crown. They are going to have a 6-8 week wait but any good smith you bring it to is going to have a wait time.
Posted on 4/29/23 at 8:48 am to Duckhammer_77
quote:
I didn't do anything, didn't disassemble. It was in my hunting bag, maybe it got knocked hard or something.
Check to make sure your takedown lever didn't get bumped out of position.
If it were mine, after I made sure it wasn't that I would try to take it apart rather than force it back into where it should be when assembled. A little force or a bump with a mallet may be needed if something is misaligned. I am not exactly sure what the order of operations is on a FN509 but turn the take down lever, pull the trigger, try to take the slide off. NOW IF YOU HAVE A ROUND IN THE CHAMBER... DON'T DO ANY OF THIS.
Posted on 4/29/23 at 8:50 am to lsufan1971
quote:
Bring it by Jim’s
Don't do this. It's not worth the risk. Jim's has value in that he has a lot of stuff but the majority is overpriced. I am not even going to get into the "gunsmithing" done at Jim's (and a lot of it is NOT done at Jim's, and the place it is sent is just as bad)
Posted on 4/29/23 at 8:54 am to Duckhammer_77
Drop the mag and try again.
Posted on 4/29/23 at 12:24 pm to Duckhammer_77
Is there a round in the chamber?
Posted on 4/29/23 at 9:49 pm to cajun3gunner
Mag's out, no round in chamber. I'll try tapping it with a mallet and working the slide to see it something breaks free
Posted on 5/1/23 at 9:30 am to Duckhammer_77
Can't you just pull the rear plate off like a glock and push the slide forward and off?
Posted on 5/1/23 at 7:31 pm to Duckhammer_77
Is there a taken down lever
Popular
Back to top
Follow TigerDroppings for LSU Football News