View in: Desktop
Copyright @2024 TigerDroppings.com. All rights reserved.
- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Posted by
Message
re: I bled the hydraulic. Still won’t go in. JD h120. Updated w videoPosted by bootlegger on 10/23/20 at 10:07 am to dstone12
I've had to (carefully) tap the female side with a blunt punch before
re: I bled the hydraulic. Still won’t go in. JD h120. Updated w videoPosted by WPsportsman on 10/23/20 at 10:13 am to dstone12
Have someone move the controls around while you try to put it in that’s what I have to do on mine
This post was edited on 10/23 at 10:14 am
re: I bled the hydraulic. Still won’t go in. JD h120. Updated w videoPosted by reds on reds on reds on 10/23/20 at 10:30 am to Ol boy
What's going on in here?
TD SponsorTD Fan
USA
Member since 2001
USA
Member since 2001
Thank you for supporting our sponsors Posted by Site Sponsor to Everyone
Advertisement
re: I bled the hydraulic. Still won’t go in. JD h120. Updated w videoPosted by Ol boy on 10/23/20 at 11:24 am to reds on reds on reds
quote:
What's going on in here?
He can’t get his lil male stub to enter the female receptacle. There’s a chance that it’s built up pressure on the female or male side. Or possibly the male or female units have crust or corrosion from not being utilized enough. ( most of the time the issue is with the female not wanting the male to insert)
He can try to tap it or slide it in and out rapidly and it may mate up.
That clear it up for you?
This post was edited on 10/23 at 11:25 am
re: I bled the hydraulic. Still won’t go in. JD h120. Updated w videoPosted by DownshiftAndFloorIt on 10/23/20 at 11:35 am to dstone12
Need to unload the ram its supplying. The weight of the implement is keeping pressure in the line, making the ball check impossible to push in. If its a loader, jack the loader up
re: I bled the hydraulic. Still won’t go in. JD h120. Updated w videoPosted by tigerfoot on 10/23/20 at 11:41 am to reds on reds on reds
quote:I dont know, but I am of the belief that if he just ran a bottle of wine thru it he could slip it right on in.
What's going on in here?
Rule of thumb for me is anytime I disconnect an implement, lower everything to the ground, turn the tractor off, cycle through all the positions for that hookup, then unhook.
Hooking up, get in position, turn off the tractor, move the levers for that hookup through all their positions, then hookup.
The key is not to have pressure on either side, the tractor side or implement side.
Hooking up, get in position, turn off the tractor, move the levers for that hookup through all their positions, then hookup.
The key is not to have pressure on either side, the tractor side or implement side.
This post was edited on 10/23 at 12:26 pm
Back to top
Follow TigerDroppings for LSU Football News