- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Anyone swap out their sling mounts?
Posted on 1/11/19 at 12:15 pm
Posted on 1/11/19 at 12:15 pm
Has anyone replaced this style
with this style of QD socket on their hunting rifle?
with this style of QD socket on their hunting rifle?
Posted on 1/11/19 at 12:19 pm to CarRamrod
Grovtec has some on Amazon that screw in, use those if it's a solid fiberglass stock.
I installed some on a manners stock a while back. Pretty simple, drill a hole and in weld them in place.
I installed some on a manners stock a while back. Pretty simple, drill a hole and in weld them in place.
Posted on 1/11/19 at 12:26 pm to CarRamrod
I didn't swap any out, but I installed some on a rifle with a wood stock. Mine have a different style base than the one in your pic. The base on mine is just a cup with a single screw hole in the bottom of the cup. So all I had to do was drill a hole the same diameter as the cup and then a pilot hole in the bottom of the cup hole. That way the top of the cup is slightly above flush with the wood. I really like it.
Posted on 1/11/19 at 1:01 pm to Tigerhead
I like uncle Mike’s better.
Posted on 1/11/19 at 1:02 pm to Jack Daniel
quote:my QD slings are way more comfortable than a traditional rifle sling.
What’s the advantage?
Posted on 1/11/19 at 1:16 pm to CarRamrod
Posted on 1/11/19 at 1:43 pm to kengel2
quote:
Grovtec
Those look badass. I just got a QD sling for my AR and I would love to put one on my deer rifle just because I like to take my sling off while I'm in the stand so it doesn't get caught on anything or make any extra unnecessary noise when I move my gun.
Posted on 1/11/19 at 10:46 pm to tigah headache
I have the ones in the OP and just unscrew them when I get in the stand. Takes 15 secs.
Posted on 1/14/19 at 3:08 pm to kengel2
quote:im assuming i would need to drill and tap the existing hole.
Grovtec
These would be the ones I would get.
Posted on 1/14/19 at 4:22 pm to Cajun367
Agree. It takes about 10 sec longer to remove the uncle mikes than the push button.
Posted on 1/14/19 at 4:29 pm to CarRamrod
quote:
im assuming i would need to drill and tap the existing hole.
Yes, only need to tap if you bought the threaded inserts.
Back to top
Follow TigerDroppings for LSU Football News