View in: Desktop
Copyright @2024 TigerDroppings.com. All rights reserved.
- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Posted by
Message
Whirlpool washer won't drain - isn't there an expert on the OT somewhere?
Posted by Tigerstark on 6/15/19 at 7:34 pm00
Whirlpool washer won't drain. It essentially stops with the error code for Long Drain immediately upon getting to the draining before the spin cycle. Then its pretty much frozen from that point. Ran diagnostic mode and it confirms the error code.
I checked for blockages as best I can.
I replaced the drain pump
Still won't work. I don't even hear the drain pump try to start up at all. I'm assuming that may mean my control board is bad but wanted anything else I should try before I spend the couple hundred bucks on the control board (just to find out its not the control board and most places won't take returns on the control boards or other electronics)
Thanks!
I checked for blockages as best I can.
I replaced the drain pump
Still won't work. I don't even hear the drain pump try to start up at all. I'm assuming that may mean my control board is bad but wanted anything else I should try before I spend the couple hundred bucks on the control board (just to find out its not the control board and most places won't take returns on the control boards or other electronics)
Thanks!
re: Whirlpool washer won't drain - isn't there an expert on the OT somewhere?Posted by TechDawg2007 on 6/15/19 at 7:35 pm to Tigerstark
A bucket tends to work well
re: Whirlpool washer won't drain - isn't there an expert on the OT somewhere?Posted by NoShow on 6/15/19 at 7:37 pm to Tigerstark
Napoleon-help the boy out.
re: Whirlpool washer won't drain - isn't there an expert on the OT somewhere?Posted by Sun God on 6/15/19 at 7:39 pm to Tigerstark
Does it have the pressure switch/tube? Sounds like the same problem mine had and I just reconnected and secured the tube on both ends and haven’t had a problem since.
re: Whirlpool washer won't drain - isn't there an expert on the OT somewhere?Posted by Tigerstark on 6/15/19 at 7:55 pm to Sun God
It does have a pressure switch tube. My understanding is that the pressure switch is when it thinks its done draining (i.e. it won't start the spin cycle but it does do at least some partial draining) but maybe I'm wrong.
Tube is connected to the control board. I'll need to get underneath again (got some water to bail out now) to check it on the bottom I guess. Thanks for the thought. I had checked it up top and for crimping partially, but not that it was connected on the other end.
Tube is connected to the control board. I'll need to get underneath again (got some water to bail out now) to check it on the bottom I guess. Thanks for the thought. I had checked it up top and for crimping partially, but not that it was connected on the other end.
re: Whirlpool washer won't drain - isn't there an expert on the OT somewhere?Posted by Sun God on 6/15/19 at 8:23 pm to Tigerstark
You’re exactly right; misread your post. If it didn’t stop trying to fill but continued to drain that would be the pressure switch/tube.
Still something easy to check that can’t hurt I suppose
Still something easy to check that can’t hurt I suppose
re: Whirlpool washer won't drain - isn't there an expert on the OT somewhere?Posted by East Coast Band on 6/15/19 at 9:20 pm to Tigerstark
I had to replace the control board on my LG washer.
What was happening to me is somehow only about half the voltage was getting to the pump and other components and nothing worked well at all: no good agitating, wouldn't drain.
Changed board, all good. I did set me back about $150.
What was happening to me is somehow only about half the voltage was getting to the pump and other components and nothing worked well at all: no good agitating, wouldn't drain.
Changed board, all good. I did set me back about $150.
TD SponsorTD Fan
USA
Member since 2001
USA
Member since 2001
Thank you for supporting our sponsors Posted by Site Sponsor to Everyone
Advertisement
re: Whirlpool washer won't drain - isn't there an expert on the OT somewhere?Posted by AlxTgr on 6/16/19 at 6:23 am to Tigerstark
When mine did something similar, it was because there was $4 of coins in the coin trap that I didn't even know existed.
re: Whirlpool washer won't drain - isn't there an expert on the OT somewhere?Posted by Nativebullet on 6/16/19 at 7:40 am to Tigerstark
I had the same issue. It's an easy fix. Most likely the lid switch. Nah, that can't be the problem is what I thought at first...but the lid switches go bad. Watch youtube. The switch is about 15 dollars.
re: Whirlpool washer won't drain - isn't there an expert on the OT somewhere?Posted by CrawDude on 6/16/19 at 10:25 am to Tigerstark
I had the same problem with my Whirlpool Cabrio with the same error code but changing the drain pump fixed it. I know you’ve done this - all I can suggest is is double check your electrical connections to the new pump to make they are well seated. I know it’s a pain in azz having to empty the damn tub by hand every time you have to turn it over to get underneath it. Good luck.
P.S. I was kind of secretly hoping at the time that wouldn’t fix it so I could buy a Speed Queen.
P.S. I was kind of secretly hoping at the time that wouldn’t fix it so I could buy a Speed Queen.
re: Whirlpool washer won't drain - isn't there an expert on the OT somewhere?Posted by Tigerstark on 6/16/19 at 2:05 pm to CrawDude
Thanks for your thoughts guys.
I'd hate to buy a new washer, but also am leary of wasting $200-250 on a computer board just to figure out its not the issue or have to pay $140+ to a repairmanwho will then make me pay more than $200 for a computer board.
Plus it seems these Cabrio's (the Maytag version and some of the Whirlpool version) don't last too long past 5 years from reading reviews - multiple things go wrong.
I'd hate to buy a new washer, but also am leary of wasting $200-250 on a computer board just to figure out its not the issue or have to pay $140+ to a repairmanwho will then make me pay more than $200 for a computer board.
Plus it seems these Cabrio's (the Maytag version and some of the Whirlpool version) don't last too long past 5 years from reading reviews - multiple things go wrong.
re: Whirlpool washer won't drain - isn't there an expert on the OT somewhere?Posted by Nativebullet on 6/16/19 at 9:38 pm to Tigerstark
quote:
I'd hate to buy a new washer, but also am leary of wasting $200-250 on a computer board just to figure out its not the issue or have to pay $140+ to a repairmanwho will then make me pay more than $200 for a computer board.
are u not reading the responses? don't buy a new washer. It's not the computer board. Replace the damn lid switch.
re: Whirlpool washer won't drain - isn't there an expert on the OT somewhere?Posted by PawnMaster on 6/17/19 at 8:45 pm to Nativebullet
quote:
I had the same issue. It's an easy fix. Most likely the lid switch. Nah, that can't be the problem is what I thought at first...but the lid switches go bad. Watch youtube. The switch is about 15 dollars.
My washer was doing the same thing this weekend. After checking literally every part on the washer, I checked the lid switch. The housing had come apart. Zip-tied it up and it’s running like a top.
Speed Queen machines are GREAT! Best investment we ever made in a washer/dryer combo. We got the "plain Jane" models,
no buttons, very few electronic parts. It;s like having a commercial machine in our house. They come with unbelievable warranties, 15 yrs on major mechanical and 3 yrs on everything.
no buttons, very few electronic parts. It;s like having a commercial machine in our house. They come with unbelievable warranties, 15 yrs on major mechanical and 3 yrs on everything.
Back to top
Follow TigerDroppings for LSU Football News