- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Where to get aluminum facia B.R. area
Posted on 11/11/21 at 3:57 pm
Posted on 11/11/21 at 3:57 pm
Need 50’ of aluminum facia. Can’t find anywhere in Baton Rouge area. White aluminum with wood grain finish.
5
Posted on 11/11/21 at 10:28 pm to Nodust
Amazon sell aluminum facia...... not sure if they have the wood grain finish.
Posted on 11/12/21 at 5:49 am to Nodust
ABC supply or advanced building products.
Posted on 11/12/21 at 11:28 am to JakeMik
Try the different metal places as well down Choctaw and down that way.
Posted on 11/12/21 at 12:58 pm to couv1217
quote:
Try the different metal places as well down Choctaw and down that way.
Tried a few in Gonzales area all they had was smooth metal. It is on back side of house so won't seen.
Amazon has a roll that looks like same thing. Are the metal brakes available for rental?
Posted on 11/12/21 at 1:32 pm to Nodust
You don't want fifty feet of coil. Too much waste for what you trying to do.
You want ten foot sheets ...What width?
If they have a coil machine with an automatic cutter ...use their capability.
My bet is to find a metal shop that can cut five ten foot sheets and have them do the press brake work. Make sure you plan for the overlap at each connection. If you are lucky, you may find a twelve foot Brake for use with aluminum
You want ten foot sheets ...What width?
If they have a coil machine with an automatic cutter ...use their capability.
My bet is to find a metal shop that can cut five ten foot sheets and have them do the press brake work. Make sure you plan for the overlap at each connection. If you are lucky, you may find a twelve foot Brake for use with aluminum
This post was edited on 11/12/21 at 1:33 pm
Posted on 11/12/21 at 3:16 pm to Nodust
Get over the wood grain and call any gutter company
Posted on 11/14/21 at 7:31 am to Nodust
It called Aluminum Trim coil.
Use to come in 50ft rolls.
Color and texture on one side.
Comes in a white box usually.
Home Depot and Lowe’s use to sell it in the back by the vinyl siding.
Places that sell vinyl siding Advanced Blvd products and ABC Supply should carry it.
Fits on a machine called a brake.
Vinyl siding installer rolls out the length they need.
Cut the coil to the size of the trim.
4 or 5ft and some change facia they can cut in 1/2 and get 100ft out of the roll.
Bend the angles they need.
Talented vinyl installers can even bend an angle to act as drip edge for the shingles.
Install with trim nails and done.
Probably easier to call a vinyl siding installer to do this for you unless you have the tools.
Use to come in 50ft rolls.
Color and texture on one side.
Comes in a white box usually.
Home Depot and Lowe’s use to sell it in the back by the vinyl siding.
Places that sell vinyl siding Advanced Blvd products and ABC Supply should carry it.
Fits on a machine called a brake.
Vinyl siding installer rolls out the length they need.
Cut the coil to the size of the trim.
4 or 5ft and some change facia they can cut in 1/2 and get 100ft out of the roll.
Bend the angles they need.
Talented vinyl installers can even bend an angle to act as drip edge for the shingles.
Install with trim nails and done.
Probably easier to call a vinyl siding installer to do this for you unless you have the tools.
This post was edited on 11/14/21 at 6:54 pm
Posted on 11/14/21 at 8:20 pm to Nodust
Check with Area Siding Distributors in Walker.
Page 1 of 1
Popular
Back to top
Follow TigerDroppings for LSU Football News