I have a Fridgedaire gas stove that I need to change over to LP. I have a 75 lb propane tank. I have googled all morning and still can't figure out exactly what I need to do this. Is anyone here familiar with this?

4 ...

Report Post

Posted by VernonPLSUfan

Leesville, La.

Member since Sep 2007

15804 posts

Posted on 6/28/20 at 8:12 am to DBama1

Might not be possible, some gas manufacturers only make a natural gas only stoves. If you can all you have to do is change the orifice I believe. I have a LP grill I wanted to change to natural, it's not compatible.

0 ...

Report Post

Posted by cgrand

HAMMOND

Member since Oct 2009

38615 posts

Posted on 6/28/20 at 8:55 am to DBama1

google frigidaire parts and there should be a conversion kit.
it will be ridiculously cheap and will be a number of orifices (orifii?)

you’ll pick out the correct one by model number and change it out at the burners

1 ...

Report Post

Posted by cgrand

HAMMOND

Member since Oct 2009

38615 posts

Posted on 6/28/20 at 9:05 am to cgrand

you’ll also need a regulator between the tank and the stove. If you are in BR go to goodwood hardware they’ll have everything you need. If not look up propane plumbing diagrams or call the manufacturer

0 ...

Report Post

Posted by Cracker

in a box

Member since Nov 2009

17657 posts

Posted on 6/28/20 at 12:49 pm to DBama1

Lp Pressure btu per hour Of the range and you will change The size of your orifice, like a jet on a carburetor but the psi is the key depending on the regulator you get

0 ...

Report Post

Posted by 90Delmore

Member since Feb 2006

260 posts

Posted on 6/28/20 at 7:46 pm to DBama1

Recently had the same opportunity with a Maytag range. There were no orifces to change. If the top of the stove does not lift for access to the pilots each burner has a nozzle that you screw all the way down. There is also a regulator behind the range that must be switched from NG toLP.
You tube is your friend

Page 1