Posted by
Message
Stellytiger
LSU Fan
Arnaudville
Member since Aug 2015
456 posts

Mix rate for Fertilome Weed Out with TriMec?
I can’t get clear answer on label. I will be spot treating.


CrawDude
LSU Fan
Baton Rouge
Member since Apr 2019
2642 posts

re: Mix rate for Fertilome Weed Out with TriMec?
From the Fertilome Weed Out Label for spot spraying.

“ST. AUGUSTINEGRASS, CENTIPEDEGRASS, AND BAHIAGRASS:
Mix 2/3 fl. oz. (4 teaspoons) in 1 gallon of water and uniformly spray 330 sq. ft. Do not apply to St. Augustinegrass, centipedegrass, or bahiagrass emerging from winter dormancy; temperatures below 45oF within 72 hours of application may cause damage. Do not use on “Floratam” St. Augustinegrass in Florida.”

I’d mix that solution, add a couple teaspoons of surfactant and spot spray the weeds you are targeting. Don’t worry about spraying it uniformity over 330 sq ft if that’s the part that is confusing you.


Stellytiger
LSU Fan
Arnaudville
Member since Aug 2015
456 posts

re: Mix rate for Fertilome Weed Out with TriMec?
I have Bermuda. Guy at Chastant Brithers told me 4 ounces per gallon for spot treatment and 48 ounces per acre for while yard treatments


CrawDude
LSU Fan
Baton Rouge
Member since Apr 2019
2642 posts

re: Mix rate for Fertilome Weed Out with TriMec?
Label directions for spot spraying Bermuda

“ BERMUDAGRASS, BUFFALOGRASS, AND BENTGRASS: Mix 1 fl. oz. ( 2 Tbs) in 1 gallon of water and uniformly spray 330 sq. ft. See Table 1 for additional spray preparations.”.

but it also states this

“ Limitations on broadcast applications to residential turfgrass:
The maximum application rate is 4 fl. oz. of product per 1,000 sq. ft. per application. The maximum number of broadcast applications is limited to 2 per year with a minimum of 30 days between applications. The maximum seasonal rate is 8 fl. oz. of product per 1,000 sq. ft.”.

1 oz per 330 sq ft is roughly equivalent to 4 oz per 1000 sq ft.

I’d suggest you try the 1 oz per gallon per gal for spot spraying, and add a couple teaspoons of surfactant.

I use 1 oz of Fertilome Weed Free Zone per gallon for spot spraying weeds in fall and spring and it does a good job of controlling most lawn weeds - it’s basically a Trimec herbicide but has Carfentrazone added.

This post was edited on 11/22 at 9:21 am


Stellytiger
LSU Fan
Arnaudville
Member since Aug 2015
456 posts

re: Mix rate for Fertilome Weed Out with TriMec?
Thanks


Replies (0)
Replies (0)
00
first pageprev pagePage 1 of 1next pagelast page
refresh

Back to top

logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram