Page 1
Page 1
Started By
Message

Frigidaire ice maker issue

Posted on 8/24/20 at 2:24 pm
Posted by TigerKurt
Kenner, LA
Member since Apr 2005
852 posts
Posted on 8/24/20 at 2:24 pm
The ice dispenser only puts out crushed ice even when the setting is on "cube".
Any ideas from the experts? Thanks
Posted by Run up middle
DeRidder
Member since Oct 2012
1406 posts
Posted on 8/24/20 at 2:38 pm to
They'll change ice maker and control panel, and it will probably do it again. Welcome to Frigidaire. Know of 3 people who have or had same issue
Posted by Cracker
in a box
Member since Nov 2009
17668 posts
Posted on 8/24/20 at 2:47 pm to
Be happy it’s not a SAMSUNG
Posted by TigerBandTuba
Member since Sep 2006
2541 posts
Posted on 8/24/20 at 2:52 pm to
There is a switch/plunger/lever on the back wall that can get stuck due to ice build-up. Check that first before replacing any electronics.
Posted by keakar
Member since Jan 2017
29866 posts
Posted on 8/24/20 at 3:55 pm to
remove ice maker, see square thingy in hole in the back wall and pull it down, it takes a little effort to do it. that resets the ice back to cubes

if you buy the replacement solenoid then DO NOT REPLACE THE WIRING HARNESS AS INSTRUCTED, the harness is wired wrong and will short out the LED lighting system. i know because i did it

solenoid is on ebay for like $20 and its easy to replace watching youtube videos how
Posted by AlxTgr
Kyre Banorg
Member since Oct 2003
81604 posts
Posted on 8/24/20 at 4:03 pm to
quote:

There is a switch/plunger/lever on the back wall that can get stuck due to ice build-up. Check that first before replacing any electronics.


This, plus check the front. May have to hold the flap as the tray is reinserted.
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram