- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Question for anyone with R & R burner -- paging TorNation
Posted on 8/28/14 at 9:56 am
Posted on 8/28/14 at 9:56 am
Anyone have the 10 gallon or larger rig with the 11" banjo burner? If so, could you give me a quick measurement on the distance between the top of the burner and the bottom of the pot so I can duplicate? Any other feedback relative to what you'd like to see on changed/added to their burner design would be much appreciated.
This post was edited on 8/28/14 at 8:09 pm
Posted on 8/28/14 at 10:10 am to GeauxldMember
Why are you trying to rip off Randy? No way you can beat his prices
Posted on 8/28/14 at 10:23 am to LSUsmartass
quote:
Why are you trying to rip off Randy? No way you can beat his prices
So, the fact that I have the ability to duplicate the burner myself and would enjoy doing so as opposed to buying it make me:
A. A rip off artist
B. Cheap
C. All of the above
Gotcha.
Anyone have anything that's actually helpful to add?
Posted on 8/28/14 at 10:28 am to GeauxldMember
If your capable of such feats then why not lay out the design and measurements yourself and call it your own?
Posted on 8/28/14 at 10:30 am to GeauxldMember
I'll add that those measurements will differ based on the manufacturer of the pot you're using.
Posted on 8/28/14 at 10:42 am to GeauxldMember
I've got the 15 gal pot/setup I can provide you with measurements on later if you like. Oh and don't sweat building one, I've had my setup measured and built many times over.
Posted on 8/28/14 at 10:52 am to LSUsmartass
quote:
If your capable of such feats then why not lay out the design and measurements yourself and call it your own?
Great idea. I'll re-invent the wheel instead of borrowing from a tried and true design.
I'll also invent a new system of measurement and a new form of mathematics to make my calculations while I'm at it. You've been incredibly helpful, sir. Many thanks.
quote:
TorNation
I would greatly appreciate it.
Posted on 8/28/14 at 3:23 pm to GeauxldMember
I apologize if I was way off, but it seemed like you were wanting to sell them (when you asked people what they would like improved) and that's what I was addressing.
Also keep in mind, like I said earlier, not all pots are the same across different manufacturers.
Also keep in mind, like I said earlier, not all pots are the same across different manufacturers.
Posted on 8/28/14 at 8:08 pm to LSUsmartass
No worries.
Bump for TorNation's measurements...
Bump for TorNation's measurements...
Posted on 8/28/14 at 9:01 pm to GeauxldMember
Not home this evening but I will get it for you tomorrow.
Posted on 9/2/14 at 4:50 pm to TorNation
You ever get that measurement for me, hoss? Thx...
Posted on 9/2/14 at 4:54 pm to GeauxldMember
I'll measure and post this evening, sorry those Tigers had me all worked up this weekend.
Posted on 9/2/14 at 6:36 pm to GeauxldMember
3" from bottom of pot to the burner on my 15 gal setup.
Posted on 9/2/14 at 8:41 pm to TorNation
quote:
I'll measure and post this evening, sorry those Tigers had me all worked up this weekend.
You weren't the only one.
Thanks for the help.
Popular
Back to top
Follow TigerDroppings for LSU Football News