- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Coaching Changes
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
Cold Water on Tub doesn't produce much water
Posted on 10/7/25 at 10:45 am
Posted on 10/7/25 at 10:45 am
My tub has two handles - hot and cold. Hot water works fine - strong pressure.
Cold water side has very little pressure. Handles are approx 18 months old.
Thoughts on cause and fix?
Cold water side has very little pressure. Handles are approx 18 months old.
Thoughts on cause and fix?
3
Posted on 10/7/25 at 10:47 am to HeartAttackTiger
Sounds like you need to look at the valve stem to see if it's still in good shape.
If you don't know how to access it, check out u-tube videos to get the steps and take care of it. It really isn't all that hard to fix or hard to find a new one if that is needed. Many times you just need new washers and 0-rings to fix it.
If you don't know how to access it, check out u-tube videos to get the steps and take care of it. It really isn't all that hard to fix or hard to find a new one if that is needed. Many times you just need new washers and 0-rings to fix it.
Posted on 10/7/25 at 10:55 am to HeartAttackTiger
What's your access like? Can you swap anything?
Posted on 10/7/25 at 10:59 am to gumbo2176
Bad mixer?
Posted on 10/7/25 at 11:39 am to jmarto1
If it's a PEX system, look at the cold water manifold valve to see if it fully "ON"
Posted on 10/7/25 at 12:53 pm to HeartAttackTiger
Is the cold water handle leaking? If so, cartridge. (amazon, cheap)
Page 1 of 1
Back to top
Follow TigerDroppings for LSU Football News