- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Favorite team: | Louisiana Tech |
Location: | The AP |
Biography: | |
Interests: | |
Occupation: | |
Number of Posts: | 71 |
Registered on: | 10/27/2011 |
Online Status: | Not Online |
Recent Posts
Message
re: Statue Controversy Spreading to Kentucky
Posted by TechME on 8/15/17 at 5:06 pm
[quote] To which part? The abolishment of slavery was a condition of surrender for the South. Slavery wasn't fully abolished in the North until 1901. Sherman and Grant had dozens of slaves each, many of whom would accompany them to the battlefield. Grant freed his in 1866, Sherman not until 187...
re: Shut the frick up Donnie
Posted by TechME on 4/23/17 at 4:47 pm
[img]https://i.redd.it/0sxl4c1dsvay.jpg[/img]...
re: OT Engineers, Cameron Hydraulic Book in PDF?
Posted by TechME on 2/6/17 at 2:06 pm
It's easy enough to find in the shadier corners of the interwebs, but as engineering reference books go it's not expensive, so I'd highly recommend you buy a copy yourself. If you have any contacts at Flowserve they may be able to hook you up, a buddy working as an application engineer there gave m...
re: Having a wedding at a plantation is now racist
Posted by TechME on 1/18/17 at 7:26 pm
What about the black girl I worked with that got married at Nottoway because that was her dream wedding spot? Is that racist?...
re: New Orleans Causeway looking at increasing toll from $3 dollars to $4 dollars
Posted by TechME on 7/19/16 at 4:47 pm
[quote]$27,551,000 in revenue (2013)[/quote]
Total revenue is $21,751,000. The $5.8MM from the state highway fund is included in the total revenue with toll revenue making up the balance.
[quote]$15,111,529 in total expenses.[/quote]
I don't think the article provided an exhaustive list ...
re: People who weedeat before mowing
Posted by TechME on 7/5/16 at 12:13 pm
[quote]I trim first, then my mower can bag the trimmings as I pass close to the fence/drive/flower beds.[/quote]
This, let the mower bag the mess from trimming and edging, less cleanup after with the blower....
re: LG Surround Sound sucks playing Netflix
Posted by TechME on 4/4/16 at 7:32 am
If you can post the exact model number for your surround system, should be able to pull the manual from the LG website to see what your options are for system setup....
re: LG Surround Sound sucks playing Netflix
Posted by TechME on 4/3/16 at 7:17 pm
Bit streaming means outputting the original digital audio stream unaltered, bit for bit, regardless of original format (Dolby Digital, DTS, ETC). Many TVs and soundbars can't decode some surround formats like DTS, so you have the option of outputting a down mixed generic digital audio signal (PCM) ...
re: LG Surround Sound sucks playing Netflix
Posted by TechME on 4/3/16 at 2:54 pm
When you're accessing Netflix through the home theater system, does it display the surround sound format? For Netflix content with multichannel audio, the audio stream should be encoded as Dolby Digital Plus format, and your receiver should display the format of the audio stream being played back. ...
re: LG Surround Sound sucks playing Netflix
Posted by TechME on 4/2/16 at 10:46 pm
Still need more info. What are you using as your Netflix source? The TV, or does the home theater system have a built-in Netflix app?...
re: Antenna/Installer Recommendation in Baton Rouge Area
Posted by TechME on 3/25/16 at 3:28 pm
Finally got this done today...used Digital Wire LLC, run by Aaron Spears. I don't have a breakout cost for just the antenna install as he also ran new wires for my surround speakers. Overall I felt total cost was reasonable and he did a good job. ...
re: Apple acts all high and mighty.. Won't turn over password to terrorists iPhone
Posted by TechME on 2/17/16 at 12:44 pm
This has to be an elaborate attempt at trolling....
re: Tool Jan 31 nola check in
Posted by TechME on 2/1/16 at 4:11 pm
They used it as an intro to Jambi. That 3-4 minutes of instrumental that segued into Jambi was actually part of a new song called Descending....
re: Antenna/Installer Recommendation in Baton Rouge Area
Posted by TechME on 1/22/16 at 5:44 pm
Actually had a someone out today to get an estimate, can update if/ when I get the antenna installed....
re: Antenna/Installer Recommendation in Baton Rouge Area
Posted by TechME on 1/10/16 at 9:20 pm
HOA won't allow a visible exterior antenna, so attic is my best option....
re: Antenna/Installer Recommendation in Baton Rouge Area
Posted by TechME on 1/10/16 at 7:12 pm
Making one isn't really as much of an issue as the attic installation and fishing coax through the wall. My attic isn't decked and I frankly don't trust myself to not put a foot through the ceiling....
Antenna/Installer Recommendation in Baton Rouge Area
Posted by TechME on 1/10/16 at 7:01 pm
Looking to get an antenna installed in the attic so I can ditch Cox, but not looking to do the installation myself (what can I say, not as spry as I once was.) That being said, can anyone recommend a good installer in the greater BR area?
Antenna recommendations are welcomed as well. I'm in Pr...
re: Explosion/Fire at Exxon Baton Rouge?? (Update in OP)
Posted by TechME on 12/18/15 at 8:50 am
Looked like Exxon had a pretty major upset yesterday afternoon too, saw at least 4 flares start up in just a few minute from my office off Essen....
re: Best inventor software for Windows
Posted by TechME on 11/28/15 at 9:19 pm
Vectorworks looks like it's focused on architectural design, may not be the best fit for someone looking to do mechanical design....
re: Best inventor software for Windows
Posted by TechME on 11/28/15 at 9:03 pm
If you're just looking for 2D CAD, check out Draftsight:
[link=(http://www.3ds.com/products-services/draftsight-cad-software/free-download/)]http://www.3ds.com/products-services/draftsight-cad-software/free-download/[/link]
It's made by the same folks that develop SolidWorks and is more or les...
Popular