- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
What is this briggs and stratton part?
Posted on 6/25/13 at 7:41 pm
Posted on 6/25/13 at 7:41 pm
Took the top off of this engine and one screw was loosenand this part was totally broken. I took the screwed in part off but cant find the part on any of the small engine websites. Look at exploded views and it doesnt seem to be listed. It is where fuel comes in from carb.
Anyone have a better site? Ill call the local shop tomorrow but never can get by there during the day.
Anyone have a better site? Ill call the local shop tomorrow but never can get by there during the day.
Posted on 6/25/13 at 8:07 pm to ADLSUNSU
Looks like the crankcase breather to me. Does it still run?
Posted on 6/25/13 at 8:20 pm to ADLSUNSU
I think it's where the choke and carburetor go.
Posted on 6/25/13 at 8:22 pm to ADLSUNSU
The intake manifold carb piece you going to need a new carb
Posted on 6/25/13 at 8:32 pm to Cracker
Really?
In the carb kits, it doesnt look like it has the long piece that goes into the engine.
I am tempted to jb weld it, its plastic.
No i doesnt run
And i is a mystery how the screw was loose in the first place
In the carb kits, it doesnt look like it has the long piece that goes into the engine.
I am tempted to jb weld it, its plastic.
No i doesnt run
And i is a mystery how the screw was loose in the first place
Posted on 6/25/13 at 9:21 pm to ADLSUNSU
so an elbow of sorts goes there thats plastic? I would superglue that and see how long it lasts
Posted on 6/25/13 at 9:45 pm to Pretzel Logic
quote:
Looks like the crankcase breather to me
This. That is a common engine so you should be able to get a replacement breather manifold. I'd go to K&D or ProPower with the engine so they could look it up.
Posted on 6/25/13 at 9:58 pm to SlackMaster
Thanks
Yea im going to take the pic tomorrow.
That pipe goes to the carb, the missing side into the engine
The little lever to the right is also a bit puzzling on how it fits with the choke lever unless a part is missing
Yea im going to take the pic tomorrow.
That pipe goes to the carb, the missing side into the engine
The little lever to the right is also a bit puzzling on how it fits with the choke lever unless a part is missing
Posted on 6/25/13 at 10:16 pm to ADLSUNSU
It's the intake tube. Just changed one of these the other day.
Posted on 6/26/13 at 12:02 am to ADLSUNSU
Man,all that shite looks kind of dirty. Just buy a new one.
Posted on 6/26/13 at 7:32 am to Broke
quote:so,does the intake tube run from the carb to the cylinder head or from the carb to the air filter assembly?
It's the intake tube. Just changed one of these the other day.
Never seen one run from the carb to the cylinder head. Especially made of plastic if this is indeed the case.
Posted on 6/26/13 at 8:14 am to meauxjeaux2
It's underneath the solenoid. It runs from the head into the carb. It basically slips into the carb with an O-ring around the tube.
Posted on 6/26/13 at 8:19 am to Broke
quote:that is a coil not a solenoid broke but I understand what you're saying.
It's underneath the solenoid
If indeed there is a plastic manifold tube running from the carb to the cylinder head,that has to be the worst engineering idea ever.
Posted on 6/26/13 at 8:20 am to GingerMerkin
That's what's broken on his motor. Of course it won't run when it can't get air or fuel in the motor.
Posted on 6/26/13 at 8:21 am to meauxjeaux2
Thanks guys
Yea goes from carb to engine and it is a kind of plastic.
Yea goes from carb to engine and it is a kind of plastic.
Posted on 6/26/13 at 8:22 am to meauxjeaux2
That's it. The little black piece slides into the tube depending on the setup of the engine. It's a terrible design and most of the time they crack and start fricking up the engine and you don't even know it's happening. It happened to me.
Posted on 6/26/13 at 8:23 am to ADLSUNSU
carbon plactic composite but still a very bad design/idea.
I mean. What the frick were those engineers thinking when they designed that? Plastic to metal,,,"yeah that should work just fine"
I mean. What the frick were those engineers thinking when they designed that? Plastic to metal,,,"yeah that should work just fine"
Posted on 6/26/13 at 8:24 am to meauxjeaux2
quote:
I mean. What the frick were those engineers thinking when they designed that? Plastic to metal,,,"yeah that should work just fine"
I get it. Wouldn't it have been prudent to just make it metal? I don't get it either. I ended up buying 2 after seeing what it was because I know it will happen again.
Posted on 6/26/13 at 8:24 am to GingerMerkin
quote:you probably have a bent blade causing excessive vibration. Maybe try wrapping the shite out of the tube with electric tape to take some of the vibration.
Had to replace that part twice in the last two weeks. The vibration keeps cracking the part.
Back to top
Follow TigerDroppings for LSU Football News