re: Installed a tube extension and my shells aren't feeding. (Posted on 2/5/13 at 12:51 am to Propagandalf)
Yes mag tube extension, my bad. Got a longer spring. It's definitely got the pressure. Just something is catching it and I have to push it in and press the release to get a shell out.
I kept playing with it and slide the bolt back a few times and sometimes it would feed and I'd reload and it won't again. Sometimes afte I push the shell in and press the release multiple shells will come out.
It's hanging up on something and it shouldn't have anything to do with the extension if the first shell is stalling.
re: Installed a tube extension and my shells aren't feeding. (Posted on 2/5/13 at 8:38 pm to jimbeam)
It was made for the 500. I got it off eBay and was listed for the 930.
Well, it fits the 930, but I when I went and looked at the paperwork it didn't list my gun. Just the 500 remmy 870 and one other. After infidel suggested the spring being too long, I remembered that the 500 has a 20" barrel and the 930 has an 18.5.
I was getting pissed. I stayed up til 1 fricking with it and trying to feel for a factory defect in the mold. Anything I could find.
Thank god for the OB bc the rest of the web were suggesting some fricked up stuff that didn't even apply to my gun. (mossberg doesn't have divots like the 870).