I'm searching for a transom mount trolling motor mount. The lip is my boat has an awkward angle that prohibits me from directly mounting I'd prefer it to come off the back of the transom itself instead of the deck. Any ideas short of having one fabricated.

3 ...

Report Post

Posted by reds on reds on reds

Birmingham

Member since Sep 2013

4200 posts

Posted on 4/27/17 at 5:07 pm to go_tigres

I made one using a 2x4 and some angled aluminum.

1 ...

Report Post

Posted by go_tigres

Member since Sep 2013

5150 posts

Posted on 4/27/17 at 6:56 pm to reds on reds on reds

The aluminum, did you get that from Home Depot or something similar or did you have to bend it yourself?

1 ...

Report Post

Posted by Polar Pop

Member since Feb 2012

10748 posts

Posted on 4/27/17 at 7:13 pm to go_tigres

You can get aluminum angle at HD.

OP, any way you can throw up a pic?

2 ...

Report Post

Posted by reds on reds on reds

Birmingham

Member since Sep 2013

4200 posts

Posted on 4/27/17 at 8:27 pm to Polar Pop

quote:
You can get aluminum angle at HD.

This

quote:
OP, any way you can throw up a pic?

And this

0 ...

Report Post

Posted by hogdaddy

Krotz Springs

Member since Feb 2010

5153 posts

Posted on 4/27/17 at 10:21 pm to go_tigres

Look at ProControll. https://procontroll.com

0 ...

Report Post

Posted by Kadjin

edge of the basin

Member since Oct 2013

1251 posts

Posted on 4/27/17 at 10:22 pm to go_tigres

Find a trolling motor dealer nearby if they have one. There's one in Lafayette near Cameron and Ambassador, can't remember the name of the place, but they have trolling motor transom mounts for like $50. Only place I could find them in Lafayette

ETA: Superior Repair Services

This post was edited on 4/27/17 at 10:26 pm

0 ...

Report Post

Posted by go_tigres

Member since Sep 2013

5150 posts

Posted on 4/28/17 at 12:27 am to Polar Pop

I don't know how to upload from my phone, but this is the exact boat and that left side transom is where I want to mount it.