- My Forums
- Tiger Rant
- LSU Recruiting
- SEC Rant
- Saints Talk
- Pelicans Talk
- More Sports Board
- Fantasy Sports
- Golf Board
- Soccer Board
- O-T Lounge
- Tech Board
- Home/Garden Board
- Outdoor Board
- Health/Fitness Board
- Movie/TV Board
- Book Board
- Music Board
- Political Talk
- Money Talk
- Fark Board
- Gaming Board
- Travel Board
- Food/Drink Board
- Ticket Exchange
- TD Help Board
Customize My Forums- View All Forums
- Show Left Links
- Topic Sort Options
- Trending Topics
- Recent Topics
- Active Topics
Started By
Message
How to replace a garage door opener (different model than old one)
Posted on 9/15/16 at 10:15 am
Posted on 9/15/16 at 10:15 am
I'm not sure if this belongs on this board or the tech board, but I was hoping for anyone's insight on this. I need to replace my garage door opener, which is a very old model Craftsman. I have a neighbor somewhere who's remote is opening my door as well, and I can't reset the codes on my opener. Either the logic board has failed or it's just not possible with my model.
So here's my question: If I want to replace the opener with a new one, which will have to be a different model, is it as easy as taking the chain off (and unbolting guide rail), remove old opener, put chain and bolt guide rail to new opener, and mount it? Or will I have to replace the rail, chain, etc?
So here's my question: If I want to replace the opener with a new one, which will have to be a different model, is it as easy as taking the chain off (and unbolting guide rail), remove old opener, put chain and bolt guide rail to new opener, and mount it? Or will I have to replace the rail, chain, etc?
Posted on 9/15/16 at 10:17 am to SUB
(no message)
This post was edited on 6/28/19 at 10:01 am
Posted on 9/15/16 at 10:21 am to SUB
Watch a couple videos on YouTube then go to home depot and buy the new opener. If you are remotely handy and have some tools the average Joe can do the replacement in about 2 hours.
Everything you need will be in the box with the new motor, including step by step instructions.
I advise getting a belt driven one with a battery backup.
Everything you need will be in the box with the new motor, including step by step instructions.
I advise getting a belt driven one with a battery backup.
Posted on 9/15/16 at 10:23 am to SUB
Just replaced mine a couple months back. It's actually a lot easier than you would think. Took me about 2hours or so and was able to use existing brackets for the drive motor, had to adjust the brackets over the door that's it. Instructions are straight forward. Got a Chamberlain 1/2hp chain drive.
Posted on 9/15/16 at 10:51 am to SUB
Ok here is what you're going to want to do:
1. One week ahead of time, make sure you pre-cool your Yeti. (Adding more stickers enhances the insulation)
2. The day of the installation, put beer into said cooler.
3. Cover beer with ice and close lid.
4. Get tools and ladder gathered into the work area.
5. Drive to local hardware store and purchase a new Opener.
6. Once you've arrived back at the house, begin to read instructions while drinking the aforementioned beer.
7. Put on your helmet, gloves, and any other proper protective gear.
8. Reevaluate the life choices that led you to ask the OT a question that Google and the previously mentioned installation instructions could've explained to you.
9. Sit back and bask in the glory of a job well done!
10. Post Pictures of your wife/GF, or the neighbors wife/GF for OT approval!
1. One week ahead of time, make sure you pre-cool your Yeti. (Adding more stickers enhances the insulation)
2. The day of the installation, put beer into said cooler.
3. Cover beer with ice and close lid.
4. Get tools and ladder gathered into the work area.
5. Drive to local hardware store and purchase a new Opener.
6. Once you've arrived back at the house, begin to read instructions while drinking the aforementioned beer.
7. Put on your helmet, gloves, and any other proper protective gear.
8. Reevaluate the life choices that led you to ask the OT a question that Google and the previously mentioned installation instructions could've explained to you.
9. Sit back and bask in the glory of a job well done!
10. Post Pictures of your wife/GF, or the neighbors wife/GF for OT approval!
Posted on 9/15/16 at 10:57 am to SUB
It's pretty easy, I would recommend a Heavy Lift operator. just take the old one down(you might even be able to re-use the bracket on the door,) and assemble the new one on the floor. If you're doing it by yourself, attach the new rail to the bracket on the door and lift the new motor up to the mounting strips and temporarily bungee it into place to allow you to bolt it on and make the electrical connections. You might also be able to use existing wiring, if not the new one will have new wiring and new "eyes." hook it up, install keypad, push button(s), program, and you're in business.
This post was edited on 9/15/16 at 11:00 am
Posted on 9/15/16 at 11:54 am to SUB
It's not difficult to replace the entire unit, rails included.
If you are getting a new model, I'd recommend a belt driven gdo. It's much much quieter than a chain drive.
The ryobi was mentioned above and it's the one I have. Super quiet, and you can control the door from anywhere with the phone app.
If you are getting a new model, I'd recommend a belt driven gdo. It's much much quieter than a chain drive.
The ryobi was mentioned above and it's the one I have. Super quiet, and you can control the door from anywhere with the phone app.
Popular
Back to top
Follow TigerDroppings for LSU Football News