Problem solved!! - Page 4 - TigerDroppings.com

Posted byMessage
NATidefan
Alabama Fan
Two hours North of Birmingham
Member since Dec 2008
23594 posts

re: Problem solved!!


quote:

Go buy an angle grinder @ walmart, cut the lock and return


That'll work too, may need to buy an extension cord... don't forget that.






Back to top
  Replies (0)
ByteMe
LSU Fan
Member since Sep 2003
19243 posts

re: Problem solved!!


quote:

Go buy an angle grinder @ walmart, cut the lock and return



What he has is more than adequate, if this thread is real.






Back to top
  Replies (0)
Napoleon
New Orleans Saints Fan
Member since Dec 2007
34488 posts

re: Problem solved!!


angle grinder
sawzsall
bolt cutters
plasma cutter




lock smith






Back to top
  Replies (0)
UFownstSECsince1950
Florida Fan
Member since Dec 2009
27304 posts

re: Problem solved!!


quote:

Rotate the lock so that the front face of the lock is perpendicular to the truck door... Then rotate the bottom of the lock upwards so that it is facing you. Unlock with key.
that's obviously the first thing I tried. It ain't budging.

I'm going up to the fire station early in the morning and gonna have them cut it for me. frick the bullshite, it's my only option.






Back to top
NATidefan
Alabama Fan
Two hours North of Birmingham
Member since Dec 2008
23594 posts

re: Problem solved!!


quote:

it's my only option.








Back to top
UFownstSECsince1950
Florida Fan
Member since Dec 2009
27304 posts

re: Problem solved!!


quote:

it's my best option
fifm








This post was edited on 2/15 at 1:57 am


Back to top
  Replies (0)
Napoleon
New Orleans Saints Fan
Member since Dec 2007
34488 posts

re: Problem solved!!


you have the key??


Get a hammer and hit the lock to on the left hand side towards to right, it should roll slightly and be perpendicular to the position its in now and you can get the key in.

But an angle grinder if in doubt. That looks like a big lock, possible to big for small bolt cutters.






Back to top
  Replies (0)
ByteMe
LSU Fan
Member since Sep 2003
19243 posts

re: Problem solved!!


quote:

frick the bullshite, it's my only option.


I just looked at your profile and realize that you are young. Do you have access to tools without having to buy them? You're making this harder than it is.






Back to top
UFownstSECsince1950
Florida Fan
Member since Dec 2009
27304 posts

re: Problem solved!!


How did you look at my profile and realize that I'm young?

I have a bag of shitty tools that I haven't packed up yet. Just went out there and tried to rotate the lock up with a hammer and it ain't budging. I'm just gonna head up to the fire station in a couple hours. They can help and will get a good laugh out of it.






Back to top
Napoleon
New Orleans Saints Fan
Member since Dec 2007
34488 posts

re: Problem solved!!


I doubt the Firemen would do it.

just get a file and spend the next two hours filing.







Back to top
ByteMe
LSU Fan
Member since Sep 2003
19243 posts

re: Problem solved!!


quote:

How did you look at my profile and realize that I'm young?


You have and edu email address.

The cutters you have will work but you have to put a lot of pressure on the lock so it will bite, otherwise it will just slip. The other option would be a drill and grinder, which I'm assuming that you don't have. I stand corrected on you trolling...I would help you out if I was near you.






Back to top
zztop1234
LSU Fan
Denham Springs
Member since Aug 2008
2169 posts

re: Problem solved!!


Hammer





Back to top
  Replies (0)
ByteMe
LSU Fan
Member since Sep 2003
19243 posts

re: Problem solved!!


quote:

I doubt the Firemen would do it.


They probably have bigger bolt cutters. It would be a dick move if they didn't help.






Back to top
  Replies (0)
ByteMe
LSU Fan
Member since Sep 2003
19243 posts

re: Problem solved!!


quote:

just get a file and spend the next two hours filing.


You just gave me a good idea. Cut a groove in the lock with a file, then use the cutters. The cutters shouldn't slip with the groove cut in to it.






Back to top
  Replies (0)
The Boat
LSU Fan
Bitch I'm from Louisiana
Member since Oct 2008
60190 posts
 Online 

re: Problem solved!!


LOCKownsUFownstSECsince2013





Back to top
Cholo
LSU Fan
National City, CA
Member since Oct 2012
1076 posts

re: Problem solved!!


Sounds like a terrible situation. You are lucky to still be alive.





Back to top
ByteMe
LSU Fan
Member since Sep 2003
19243 posts

re: Problem solved!!


quote:

Sounds like a terrible situation. You are lucky to still be alive.


I don't know how far you are from Anniston but you should help him out.






Back to top
Cholo
LSU Fan
National City, CA
Member since Oct 2012
1076 posts

re: Problem solved!!


quote:

I don't know how far you are from Anniston but you should help him out.


He's either trolling or retarded.






Back to top
Cholo
LSU Fan
National City, CA
Member since Oct 2012
1076 posts

re: Problem solved!!


In the off chance you are serious, you should try getting a hammer and using that to rotate the lock to where the key fits. I don't see why it wouldn't rotate.





Back to top
UFownstSECsince1950
Florida Fan
Member since Dec 2009
27304 posts

re: Problem solved!!


How can you see my email address?? I don't care if you can, but when I click on my profile it does not show.

And I tried everything with the bolt cutters. They barely fit around the lock at the very tip of the cutters, and as soon as I start to close them they slip right off.....won't even scratch the lock.

Thanks for the help though y'all....and the jort jokes. About to pass out and head up to the fire dept in a couple hours....no reason why they wouldn't help me.


Eta: cholo, read above....I've obviously tried that. And why would someone "troll" over something so dumb? Come on y'all .....





This post was edited on 2/15 at 3:02 am


Back to top


Back to top