Problem solved!!
Return to Board  •  Menu  •  Bottom  Page 3 of 6  
Message
re: Problem solved!!
Posted by TH03 on 2/15 at 1:06 am to ByteMe
Probably the nazi vanilla cookie, chocolate icing kind. Like a douche.


Reply  •  Back to Top
Posted by TigerBwoy on 2/15 at 1:08 am to UFownstSECsince1950
quote:

bolt cutters.


This.

Cheapest and quickest remedy.



Reply  •  Back to Top
Posted by Them on 2/15 at 1:08 am to ByteMe
quote:

Double stuff? Details are very important.


what the frick else are you gonna use for a job like this? I call them heavy duty oreos.


This post was edited on 2/15 at 1:10 am

Reply  •  Back to Top
Posted by ByteMe on 2/15 at 1:18 am to Them
quote:

what the frick else are you gonna use for a job like this?


I knew this but others might have tried it with the single stuff and it wouldn't have worked. I was just trying to help out.



Reply  •  Back to Top
Posted by PepaSpray on 2/15 at 1:18 am to UFownstSECsince1950
go buy bolt cutters. cut the lock.

really?



Reply  •  Back to Top
Posted by ByteMe on 2/15 at 1:21 am to PepaSpray
quote:

go buy bolt cutters. cut the lock.


That's the old school way. Get with the times.



Reply  •  Back to Top
Posted by UFownstSECsince1950 on 2/15 at 1:24 am to ByteMe
I knew this shite wouldn't work. Just bought these from walmart and they barely fit around the lock. As soon as I go to cut it, they slip right off. frick. Me. Running.





Reply  •  Back to Top
Posted by TH03 on 2/15 at 1:25 am to UFownstSECsince1950
Your fault for buying shitty bolt cutters


Reply  •  Back to Top
Posted by Them on 2/15 at 1:28 am to ByteMe



Reply  •  Back to Top
Posted by UFownstSECsince1950 on 2/15 at 1:28 am to TH03
It was the biggest and best kind they had. I knew this would happen. Only time I've ever seen someone cut a lock before was in high school. Our big arse PE teacher would struggle with some of the smaller combination locks. No way in hell a bolt cutter is cutting thru this pad lock. The picture doesn't do it justice, this thing is on steroids.


Reply  •  Back to Top
Posted by Swagga on 2/15 at 1:31 am to UFownstSECsince1950
So where is the key


Reply  •  Back to Top
Posted by UFownstSECsince1950 on 2/15 at 1:31 am to Hickok
quote:

Is there a boat load of clothes in there?
now that's funny

And yes there are




So what do I do now? Try to find some Incredible Hulk bolt cutters at a hardware store tomorrow? I have a feeling that no type of bolt cutters are going to work with this padlock.



Reply  •  Back to Top
Posted by UFownstSECsince1950 on 2/15 at 1:32 am to Swagga
I have the key. There's only 1/4" space between the bottom of the lock and the truck. It's too big to rotate the lock upwards.

I'm about to call the fire department and see if they will help. There's a station half a mile from my house. I know that's dumb and they won't help (they shouldn't)....but I'm all out of options.


This post was edited on 2/15 at 1:34 am

Reply  •  Back to Top
Posted by Popcorn on 2/15 at 1:35 am to UFownstSECsince1950
Take the lock in your hand. Rotate it 90* to you so that it is on a 180* plane. Use the key.


Reply  •  Back to Top
Posted by imAMAZING on 2/15 at 1:35 am to UFownstSECsince1950
LINK


Reply  •  Back to Top
Posted by NATidefan on 2/15 at 1:35 am to UFownstSECsince1950
quote:

I have the key. There's only 1/4" space between the bottom of the lock and the truck. It's too big to rotate the lock upwards.

I'm about to call the fire department and see if they will help. There's a station half a mile from my house. I know that's dumb and they won't help (they shouldn't)....but I'm all out of options.


You fail as a man.



Reply  •  Back to Top
Posted by UFownstSECsince1950 on 2/15 at 1:39 am to NATidefan
Please tell me what you would do? I can't rotate the lock, and bolt cutters aren't cutting this thing. frick, I can't believe I did this


Reply  •  Back to Top
Posted by ByteMe on 2/15 at 1:43 am to UFownstSECsince1950
quote:

Just bought these from walmart


I'll give you the benefit of the doubt but I can't say that I've ever seen bolt cutters at walmart. That being said, I never looked for them and Stanley is huge when it comes to walmart tools.

quote:

hey barely fit around the lock.


This might sound like bull shite but I've had and continue to have a lot of experience with cutting locks off of lockers. Those cutters would have no problem cutting a lock, especially if they're new. "barely" fitting around the lock is a moot point, because they fit around the lock.

I smell a troll.



Reply  •  Back to Top
Posted by NATidefan on 2/15 at 1:44 am to UFownstSECsince1950
get a screwdriver or something with leverage. Rotate the lock so that the front face of the lock is perpendicular to the truck door... Then rotate the bottom of the lock upwards so that it is facing you. Unlock with key.

This post was edited on 2/15 at 1:45 am

Reply  •  Back to Top
Posted by LordSnow on 2/15 at 1:47 am to NATidefan
Go buy an angle grinder @ walmart, cut the lock and return


Reply  •  Back to Top  •  Refresh
Return to Board
Jump to Page   

           Page 3 of 6           

 

 Message Boards
 Tiger Rant
 Score Board
 Recruiting Board
 SEC Rant
 Saints Talk
 Pelicans Talk
 More Sports Board
 Soccer Board
 O-T Lounge
 Tech Board
 Outdoor Board
 Movie/TV Board
 Music Board
 Political Talk
 Money Talk
 Fark Board
 Gaming Board
 Fantasy Sports
 Food and Drink Board
 Ticket Exchange
 Help Board
 

 News
 LSU
 More Sports
 Sports Lite
 

 Other Options
 >> Search
 

 SECRant.com Links
 SEC Rant
 SEC Recruiting
 SEC Tickets
 Off-Topic Board
 

 Geaux.com Dining Guide
 New Orleans
 Baton Rouge
 

 Site Features (Full Version)
 Home Page
 LSU Football Schedule
 Pick'em Home Page
 
Back to top
Sign In 
View in: Desktop
Copyright ©2014 TigerDroppings.com.