Started By
Message

Calling HVAC Experts

Posted on 9/7/23 at 6:57 am
Posted by jctiger73
Baton Rouge
Member since Nov 2009
256 posts
Posted on 9/7/23 at 6:57 am
Last night, about midnight, I woke up and the AC blower was running, but was not cooling. This happened several weeks ago and it was just a bad breaker, which I replaced. When I checked things out last night, everything looked normal - drip pan dry, breaker not tripped, thermostat appeared normal. I turned everything off for about a minute, turned the breaker off and on and restarted the system. It's been working fine ever since. So, what happened? Thanks for your input.
Posted by The Mick
Member since Oct 2010
43270 posts
Posted on 9/7/23 at 7:11 am to
Mine did that last year and the breaker on/off trick would reset it and it would work for a couple days then happen again. I think a/c guy replaced capacitor eventually.

Yours will probably do it again soon imo.
Posted by zippyputt
Member since Jul 2005
5802 posts
Posted on 9/7/23 at 7:59 am to
Check the outside unit to see if its running. Mine did this and it was capacitor. Although a few years back mine did it and cleaning the coils outside helped as they were pretty dirty.
Posted by Tigers4Lyfe
Member since Nov 2010
4578 posts
Posted on 9/7/23 at 8:20 am to
I concur with the others that I would look to the capacitor.
Posted by TigerTatorTots
The Safeshore
Member since Jul 2009
80806 posts
Posted on 9/7/23 at 9:00 am to
Mine did this earlier this year and it was the capacitor
Posted by Oneulus
Member since Sep 2021
88 posts
Posted on 9/7/23 at 9:10 am to
Hi, Climate Care Air Conditioning & Heating LLC., Here for ya. There are several factors a correctly licensed HVAC should check when tripping a breaker. When a compressor has an internal short to the case it’s a dead short to ground, could be intermittent, a contactor that arcs or sticks when it’s not supposed to can cause it. Usually a capacitor will kick on the fan in your condenser but your compressor won’t kick on, sometimes you will hear the compressor making a groaning noise or buzzing sound. The wiring plug that plugs into the compressor can burn or short at that location causing a trip relay. It’s going to be at the condenser just about always, very rarely but it does occur that your disconnect can be bad, I’ve seen lightning do this before, opened up the disconnect and it was burnt but was still trying to pass enough power to try and kick the condenser on only to trip the breaker. Hope that helps
Posted by calcotron
Member since Nov 2007
8317 posts
Posted on 9/7/23 at 9:12 am to
Capacitor board
Posted by REB BEER
Laffy Yet
Member since Dec 2010
16268 posts
Posted on 9/7/23 at 9:32 am to
Mine did the same this year. The code on the thermostat showed low refrigerant, but it turned out to be a capacitor. I didn't even go look at it and trusted the code. Called a guy we know, he came out and looked at the outside unit and sure enough the capacitor was all swoll up.
Posted by Notro
Alison Brie's Boobs
Member since Sep 2011
7886 posts
Posted on 9/7/23 at 7:40 pm to
If the outside unit was not running make sure the contactor is working properly...
This post was edited on 9/7/23 at 7:41 pm
first pageprev pagePage 1 of 1Next pagelast page
refresh

Back to top
logoFollow TigerDroppings for LSU Football News
Follow us on Twitter, Facebook and Instagram to get the latest updates on LSU Football and Recruiting.

FacebookTwitterInstagram